Cost-effective Edge Network Connection Solution
The FGSW-2620CS provides 24 Fast Ethernet ports and 2 Gigabit Ethernet ports and offers wire-speed packet transfer performance without risks of packet loss. It is equipped with non-blocking 8.8Gbps backplane; greatly simplifies the tasks of upgrading your LAN for catering to increasing bandwidth demands. The high data throughput makes the FGSW-2620CS ideal for most Gigabit environments, especially upgrading network to a Gigabit environment.
Advanced and Friendly Web-Based Management
For efficient management, the FGSW-2620CS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, Port-Based / IEEE 802.1Q / MTU VLAN, port mirroring, port trunk, QoS, bandwidth control, broadcast storm control, STP, RSTP, configuration backup/recovery, MAC address / TCP & UDP filter and IGMP Snooping v1/v2.
The FGSW-2620CS provides Port-Based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allowed on the FGSW-2620CS will be maximally up to 26 for port based or up to 32 for IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group and only can access the public port 25 / 26 or port 26. Via supporting port trunking, the FGSW-2620CS allows the operation of a high-speed trunk combining multiple ports. The FGSW-2620CS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk and 1 group of 2-Port 10/100/1000Mbps trunk support with up to 2000Mbps bandwidth per trunk, and supports fail-over as well.
Easy Long Distance Installation
The FGSW-2620CS is equipped with the MDI/MDI-X auto detection for easy plug and play connection, regardless of cabling types in straight through or crossover. In addition, with its Auto-Negotiation capability, all the RJ-45/UTP ports of the FGSW-2620CS can be configured to speeds of 10/20Mbps / 100/200Mbps (Fast Ethernet) and 1000/2000Mbps (Gigabit Ethernet) automatically.
The two Gigabit combo ports of the FGSW-2620CS can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Form Factor Pluggable) interfaces. The distance can be extended from 100 meters (TP), 550 meters (Multi-mode fiber), up to above 10/20/30/40/50/70/120 kilometers (Single-mode fiber).
| Ordering Information |
| FGSW-2620CS |
24-Port 10/100Mbps + 2 Gigabit TP / SFP Combo Web Smart Switch |
Workgroup Switch
With 24 10/100Mbps ports and up to 2 copper or Gigabit Ethernet fiber ports, the FGSW-2620CS provides a cost-effective, high-performance solution for power users.
Department Switch
The FGSW-2620CS can easily build a local, high bandwidth Fast Ethernet network for backbone of your department by performing 8.8 Gigabits per second, non-blocking switch fabric. With the two built-in SFP ports, the FGSW-2620CS provides the uplink to the backbone network through Gigabit Ethernet LX/SX SFP modules.
Physical Port
• 24 x 10/100Base-TX Fast Ethernet ports
• 2 x 10/100/1000Base-T TP ports
• 2 x 1000Base-X SFP slots, shared with Port-25 and Port-26
Layer 2 Features
• Auto-MDI/MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE frame flow control
(full-duplex)
• High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth
• Supports VLAN
–IEEE 802.1Q Tag-Based VLAN
–Port-Based VLAN
–MTU VLAN (Multi-Tenant Unit VLAN)
• Supports Spanning Tree Protocol
–STP, IEEE802.1D (Classic Spanning Tree Protocol)
–RSTP, IEEE802.1W (Rapid Spanning Tree Protocol)
–Loopback Detection
• Supports Link Aggregation
–up to 3 trunk groups
–up to 4 Fast Ethernet ports or 2 Gigabit ports per trunk group
–IEEE 802.3ad LACP (Link Aggregation Control Protocol)
–Cisco ether-channel (Static Trunk)
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port
Quality of Service
• 2 priority queues on all Switch ports
• Traffic classification
–Port-Based priority
–IEEE 802.1p based priority
–IP TOS / DSCP based priority
–TCP / UDP Port-Based QoS
• Strict priority and Weighted Round Robin (WRR) CoS policies
• In/Out rate limit control on each port
• Broadcast Storm Control support
Multicast
• Supports IGMP Snooping v1 and v2
Security
• MAC address filter
• TCP & UDP filter on each port
• Management idle time security
Management
• Remote Web interface for Switch management and setup
• Supports SNMP v1
• Supports DHCP Option82 and DHCP Relay
• Firmware upgrade through Web interface
• Configuration upload / download through Web interface
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deploy management