PLANET VC-205-KIT PoE over Coaxial Extender Kit is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) into PoE IP camera, PoE wireless AP and any 802.3af/at complied powered device (PD).
The VC-205-KIT consists of a Transmitter and Receiver set which can work in pair without any power adapter anywhere on your network infrastructure. It is perfect solution for sending IP Video links and power to remote PoE IP camera installation that is beyond the 100-meter distance limit of Ethernet.
The solution contains two brand-new products:
■ VC-205PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter
■ VC-205PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver
Convenient Installation
The VC-205-KIT is plug and play devices which can extend the distance of existing application without the need of configuring by software and is also compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front panel show the operating status of the individual port and the whole system, enabling the administrator efficiently manage the network.
Power over Coaxial
Based on IEEE 802.3at High Power over Ethernet and up to 25 watts of power output, PLANET PoE over coaxial extender kit solution eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE switch, to provide power to both transceivers and the camera at long range. This feature eliminates the need for local and remote site power supplies.
IEEE 802.3at/af PoE Injector and PoE PD in One Box Design
The VC-205PR, which power sourcing from the transmitter VC-205PT, is a Single-port, 802.3at High Power over Ethernet Injector providing maximum up to 30 watts of power output over Ethernet cable which allows data and power to transmit simultaneously through the cable to PoE PD (Powered Device).
Stable Operating Performance under Difficult Environments
The VC-205PT and VC-205PR extender kit is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network.
| Ordering Information |
| VC-205-KIT |
Power over Coaxial Extender Kit |
Applications of VC-205-Kit Power over Coaxial Extender Kit
The VC-205-KIT can split into two different kinds of combinations. The VC-205PT can be powered by either external DC power adapter or high power PoE switch. The power output of the VC-205PR is a PoE output to the PoE Power Devices (PD).
Type 1 – VC-205PT with 52~56V power adapter and VC-205PR as PoE power output
| |
CPE
|
CO
|
|
VC-205PT
|
VC-205PR
|
|
Power Input
|
Power adapter with 52~56V DC in
|
BNC with DC power over coaxial input
|
|
Power Output
|
BNC with DC power over coaxial output
|
RJ-45 with 802.3at/af PoE output
|
Type 2 – VC-205PT with PoE power input and VC-205PR as PoE power output
| |
CPE
|
CO
|
|
VC-205PT
|
VC-205PR
|
|
Power Input
Power Input
|
RJ-45 with 802.3at/af PoE input
|
BNC with DC power over coaxial input
|
|
Power Output
Power Output
|
BNC with DC power over coaxial output
|
RJ-45 with 802.3at/af PoE output
|
Physical Port
VC-205PT
- Copper: 1 x 10/100Base-TX (802.3af/at PoE In)- BNC: Power over coaxial trasnmitter
VC-205PR
- Copper: 1x 10/100Base-TX (802.3af/at PoE Out)- BNC: Power over coaxial receiverPower over Ethernet
Eliminates power cabling with PoE over Coaxial
Ethernet over Coaxial up to 1km with 5C2V/RG6 75Ω cable
Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet on RJ-45 ports
Supports PoE Power up to 30.8 watts (vary on Power Source and Coaxial Distance)
Auto detects powered device (PD) (VC-205PR)
Layer 2 Features
Supports auto-negotiation and 10/100Mbps half / full duplex mode
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
VDSL2 Features
Defines asymmetric (Band Plan 998) for the transmission of upstream and downstream signals
Industrial Case / Installation
Supports extensive LED indicators for network diagnostics
IP30 metal case protection
Compact size, DIN rail and wall mount design
Power Input: external DC or PoE power input (VC-205PT)
Power Output: PoE power output (VC-205PR)
Supports EFT protection 2000V DC for power line
Supports 2000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature